C
News新闻资讯
Metal drawing stamping parts several necessary attention
Date of issue：2022-06-24 Number of visits：505 Publishing author：BangBaoWuJin
Problems that should be paid attention to in the manufacturing of tensile stamping parts:
1. Improve the existing process equipment, work hard and skillfully, improve product quality, meet the higher product quality and stamping parts supply requirements of foreign main engine factories.
2, in the ability of the premise, nitrogen machine, as far as possible to use advanced manufacturing technology and equipment, establish and improve the quality assurance system, improve precision, professional, automatic manufacturing level, to meet the needs of mass production.
3, further strengthen the concept of good faith, do not promise to the user any things they are not sure of, to ensure that any commitment to the user, in the city of automobile stamping field to establish a good reputation of the enterprise, non-metallic compensator, strive to become a hundred years of enterprise.
4. Introduce and cultivate international talents, understand the local conditions and customs, laws and regulations, language and culture of other countries, ensure unimpeded communication with foreign metal stamping enterprises, and improve the success rate of cooperation.
The service life of drawing stamping parts depends on reasonable mold structure, high manufacturing accuracy, good heat treatment effect and correct selection of punch, installation accuracy of drawing stamping parts, etc. Besides, the correct use, maintenance and maintenance of the mold can not be ignored, which should pay attention to the following points:
(1) Before installation and use of tensile stamping parts, strict inspection should be conducted to remove dirt and check whether the guide sleeve and mold of tensile stamping parts are well lubricated.
(2) according to the installation procedure of the mold, the convex and concave die is installed on the turntable, so as to ensure that the direction of the convex and concave drawing stamping parts is consistent, especially the drawing stamping parts with the direction requirements should be more careful, to prevent wrong installation and reverse installation.
(3) when the punch and concave die of the drawing stamping parts are worn, they should be stopped and grinded in time, otherwise they will rapidly expand the wear degree of the die edge, accelerate the wear of the die, and reduce the quality of the stamping parts and the life of the die.
1. Improve the existing process equipment, work hard and skillfully, improve product quality, meet the higher product quality and stamping parts supply requirements of foreign main engine factories.
2, in the ability of the premise, nitrogen machine, as far as possible to use advanced manufacturing technology and equipment, establish and improve the quality assurance system, improve precision, professional, automatic manufacturing level, to meet the needs of mass production.
3, further strengthen the concept of good faith, do not promise to the user any things they are not sure of, to ensure that any commitment to the user, in the city of automobile stamping field to establish a good reputation of the enterprise, non-metallic compensator, strive to become a hundred years of enterprise.
4. Introduce and cultivate international talents, understand the local conditions and customs, laws and regulations, language and culture of other countries, ensure unimpeded communication with foreign metal stamping enterprises, and improve the success rate of cooperation.
The service life of drawing stamping parts depends on reasonable mold structure, high manufacturing accuracy, good heat treatment effect and correct selection of punch, installation accuracy of drawing stamping parts, etc. Besides, the correct use, maintenance and maintenance of the mold can not be ignored, which should pay attention to the following points:
(1) Before installation and use of tensile stamping parts, strict inspection should be conducted to remove dirt and check whether the guide sleeve and mold of tensile stamping parts are well lubricated.
(2) according to the installation procedure of the mold, the convex and concave die is installed on the turntable, so as to ensure that the direction of the convex and concave drawing stamping parts is consistent, especially the drawing stamping parts with the direction requirements should be more careful, to prevent wrong installation and reverse installation.
(3) when the punch and concave die of the drawing stamping parts are worn, they should be stopped and grinded in time, otherwise they will rapidly expand the wear degree of the die edge, accelerate the wear of the die, and reduce the quality of the stamping parts and the life of the die.
